Preliminary documentation for Ice 3.7.1 Beta. Do not use in production applications. Refer to the space directory for other releases.

This page shows how to create an Ice application with C#.

On this page:

Create Projects for your Client and Server Applications

We create two projects, one for the Server application and one for the Client application. These are regular Console projects with very little Ice-specific additions.

 

Open Visual Studio and create a new Console Application

Create the client project using "File > Add > New Project..."


Add the Ice Builder to the projects using the "Tools > Add Ice Builder to Project" menu.

Then add the zeroc.ice.net NuGet package to the projects with the NuGet Package Manager, found in "Tools > NuGet Package Manager > Manage NuGet Packages for Solution...".


 

Open a new Command Prompt a run the following command to create the server and client projects:

dotnet new console -o Server

This generates a new .NET Core console application project in the Server directory.

Then add a reference to the zeroc.ice.net NuGet package to this project:

dotnet add Server package zeroc.ice.net

Finally, repeat these steps for the client project:

dotnet new console -o Client
dotnet add Client package zeroc.ice.net

Compile your Slice File

The next step is to add the Slice file (Printer.ice) created earlier to each project, and then compile this Slice file.

Open the "Project > Add Existing Item" dialog and add Printer.ice to your Project:

The Ice Builder immediately generates file generated\Printer.cs from Printer.ice unless you disabled automatic building by the Ice Builder.

If you have automatic building disabled, select Build to build your project. The build generates generated\Printer.cs from Printer.ice (using Ice Builder) and then compiles both generated\Printer.cs and the default no-op Program.cs.


Ice Builder invokes the Slice to C# compiler (slice2cs) to compile Slice files into C# files.

Add a Slice item that includes Printer.ice to your two projects. The screenshot below shows the client project:

When building the project, the SliceCompile task (imported automatically from the zeroc.ice.net NuGet package) compiles Printer.ice into generated/Printer.cs using the Slice to C# compiler, slice2cs.

Use the following command to build the projects:

dotnet build Server
dotnet build Client

Write and Compile your Server

To implement our Printer interface, we must create a servant class. By convention, a servant class uses the name of its interface with an I-suffix, so our servant class is called PrinterI and we will place it into the default C# source file Program.cs:

C#
using System;

namespace Server
{
    public class PrinterI : Demo.PrinterDisp_
    {
        public override void printString(string s, Ice.Current current)
        {
            Console.WriteLine(s);
        }
    }

    class Program
    {
        static void Main(string[] args)
        {
        }
    }
}

The PrinterI class inherits from a base class called PrinterDisp_, which is generated by the slice2cs compiler. The base class is abstract and contains a printString method that accepts a string for the printer to print and a parameter of type Ice.Current. (For now we will ignore the Ice.Current parameter.) Our implementation of the printString method simply writes its argument to the terminal.

The remainder of the server code follows in Program.cs and is shown in full here:

C#
using System;

namespace Server
{
    public class PrinterI : Demo.PrinterDisp_
    {
        public override void printString(string s, Ice.Current current)
        {
            Console.WriteLine(s);
        }
    }

    public class Program
    {
        public static int Main(string[] args)
        {
            try
            {
                using(Ice.Communicator ic = Ice.Util.initialize(ref args))
                {
                    var adapter =
                        ic.createObjectAdapterWithEndpoints("SimplePrinterAdapter", "default -h localhost -p 10000");
                    adapter.add(new PrinterI(), Ice.Util.stringToIdentity("SimplePrinter"));
                    adapter.activate();
                    ic.waitForShutdown();
                }
            }
            catch(Exception e)
            {
                Console.Error.WriteLine(e);
                return 1;
            }
            return 0;
        }
    }
}

The body of Main contains a try block in which we place all the server code, followed by a catch block. The catch block catches all exceptions that may be thrown by the code; the intent is that, if the code encounters an unexpected run-time exception anywhere, the stack is unwound all the way back to Main, which prints the exception and then returns failure to the operating system.

The Ice.Communicator object implements IDisposable, which allows us to use the using statement for the initialization of the Ice.Communicator object. This ensures the communicator destroy method is called when the using block goes out of scope. Doing this is essential in order to correctly finalize the Ice run time.

Failure to call destroy on the communicator before the program exits results in undefined behavior.

The body of our try block contains the actual server code.

The code goes through the following steps:

  1. We initialize the Ice run time by calling Ice.Util.initialize. (We pass args to this call because the server may have command-line arguments that are of interest to the run time; for this example, the server does not require any command-line arguments.) The call to initialize returns an Ice.Communicator reference, which is the main object in the Ice run time.
  2. We create an object adapter by calling createObjectAdapterWithEndpoints on the Communicator instance. The arguments we pass are "SimplePrinterAdapter" (which is the name of the adapter) and "default -p 10000", which instructs the adapter to listen for incoming requests using the default protocol (TCP/IP) at port number 10000.
  3. At this point, the server-side run time is initialized and we create a servant for our Printer interface by instantiating a PrinterI object.
  4. We inform the object adapter of the presence of a new servant by calling add on the adapter; the arguments to add are the servant we have just instantiated, plus an identifier. In this case, the string "SimplePrinter" is the name of the Ice object. (If we had multiple printers, each would have a different name or, more correctly, a different object identity.)
  5. Next, we activate the adapter by calling its activate method. (The adapter is initially created in a holding state; this is useful if we have many servants that share the same adapter and do not want requests to be processed until after all the servants have been instantiated.)
  6. Finally, we call waitForShutdown. This call suspends the calling thread until the server implementation terminates, either by making a call to shut down the run time, or in response to a signal. (For now, we will simply interrupt the server on the command line when we no longer need it.)

We can compile the server code as follows:

Build the server project using "Build > Builder Server"

Build the server project using the dotnet build command:

cd Server
dotnet build


Write and Compile your Client

The client code, in Client/Program.cs, looks very similar to the server.

Here it is in full:

C#
using Demo;
using System;

namespace Client
{
    public class Program
    {
        public static int Main(string[] args)
        {
            try
            {
                using(Ice.Communicator ic = Ice.Util.initialize(ref args))
                {
                    var obj = ic.stringToProxy("SimplePrinter:default -h localhost -p 10000");
                    var printer = PrinterPrxHelper.checkedCast(obj);
                    if(printer == null)
                    {
                        throw new ApplicationException("Invalid proxy");
                    }
                    
                    printer.printString("Hello World!");
                }
            }
            catch(Exception e)
            {
                Console.Error.WriteLine(e);
                return 1;
            }
            return 0;
        }
    }
}

Note that the overall code layout is the same as for the server: we use the same try and catch blocks to deal with errors. The code in the try block does the following:

  1. As for the server, we initialize the Ice run time by calling Ice.Util.initialize within the using statement
  2. The next step is to obtain a proxy for the remote printer. We create a proxy by calling stringToProxy on the communicator, with the string "SimplePrinter:default -p 10000". Note that the string contains the object identity and the port number that were used by the server. (Obviously, hard-coding object identities and port numbers into our applications is a bad idea, but it will do for now; we will see more architecturally sound ways of doing this when we discuss IceGrid.
  3. The proxy returned by stringToProxy is of type Ice.ObjectPrx, which is at the root of the inheritance tree for interfaces and classes. But to actually talk to our printer, we need a proxy for a Printer interface, not an Object interface. To do this, we need to do a down-cast by calling PrinterPrxHelper.checkedCast. A checked cast sends a message to the server, effectively asking "is this a proxy for a Printer interface?" If so, the call returns a proxy of type Demo::Printer; otherwise, if the proxy denotes an interface of some other type, the call returns null.
  4. We test that the down-cast succeeded and, if not, throw an error message that terminates the client.
  5. We now have a live proxy in our address space and can call the printString method, passing it the time-honored "Hello World!" string. The server prints that string on its terminal.

The client's project is just like the server's project shown earlier.

Build the client project using "Build > Builder Client"

Build the client project using dotnet build command:

cd Client
dotnet build

Run your Client and Server

To run client and server, we first start the server in a separate window:

server
dotnet server.dll

 

At this point, we won't see anything because the server simply waits for a client to connect to it. We run the client in a different window:

client
 
dotnet client.dll
 


The client runs and exits without producing any output; however, in the server window, we see the "Hello World!" that is produced by the printer. To get rid of the server, we just interrupt it on the command line for now.

If anything goes wrong, the client will print an error message. For example, if we run the client without having first started the server, we get something like the following:

Ice.ConnectionRefusedException
    error = 0
   at Ice.ObjectPrxHelperBase.ice_isA(String id, OptionalContext context) in C:\Users\vagrant\workspace\ice-dist\netcore\dist-utils\build\ice-netcore\builds\ice-VC141\csharp\src\Ice\Proxy.cs:line 887
   at Demo.PrinterPrxHelper.checkedCast(ObjectPrx b) in D:\3.7\ice-demos\csharp\Manual\net45\printer\Client\generated\Printer.cs:line 196
   at Client.Program.Main(String[] args) in D:\3.7\ice-demos\csharp\Manual\net45\printer\Client\Program.cs:line 18
Caused by: System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it


See Also

  • No labels