On this page:
Ice.Plugin.DB
Synopsis
Ice.Plugin.DB=IceGridSqlDB:createSqlDB
Description
The database storage mechanism used by the IceGrid registry is abstracted in such a way that an alternate mechanism can be selected using the standard Ice plug-in facility. If this property is not defined, the registry uses Freeze as its default storage mechanism. Alternatively, you can define the Ice.Plugin.DB
property as shown above to use a SQL database instead, in which case additional properties may also be necessary (see the IceGrid.SQL
properties below).
IceGrid.InstanceName
Synopsis
IceGrid.InstanceName=name
Description
Specifies an alternate identity category for the well-known IceGrid objects. If defined, the identities of the IceGrid objects become:
name/AdminSessionManager
name/AdminSessionManager-replica
name/AdminSSLSessionManager
name/AdminSSLSessionManager-replica
name/NullPermissionsVerifier
name/NullSSLPermissionsVerifier
name/Locator
name/Query
name/Registry
name/Registry-replica
name/RegistryUserAccountMapper
name/RegistryUserAccountMapper-replica
name/SessionManager
name/SSLSessionManager
If not specified, the default identity category is IceGrid
.
IceGrid.Node.AllowEndpointsOverride
Synopsis
IceGrid.Node.AllowEndpointsOverride=num
If num
is set to a non-zero value, an IceGrid node permits servers to override previously set endpoints even if the server is active. Setting this property to a non-zero value is necessary if the servers managed by the node use the object adapter operation refreshPublishedEndpoints
. The default value of num
is zero.
IceGrid.Node.AllowRunningServersAsRoot
Synopsis
IceGrid.Node.AllowRunningServersAsRoot=num
If num
is set to a non-zero value, an IceGrid node will permit servers started by the node to run with super-user privileges. Note that you should not set this property unless the node uses a secure endpoint; otherwise, clients can start arbitrary processes with super-user privileges on the node's machine.
The default value of num
is zero.
IceGrid.Node.AdapterProperty
Synopsis
IceGrid.Node.AdapterProperty=value
Description
An IceGrid node uses the adapter name IceGrid.Node
for the object adapter that the registry contacts to communicate with the node. Therefore, adapter properties can be used to configure this adapter.
IceGrid.Node.CollocateRegistry
Synopsis
IceGrid.Node.CollocateRegistry=num
Description
If num
is set to a value larger than zero, the node collocates the IceGrid registry.
The collocated registry is configured with the same properties as the standalone IceGrid registry.
IceGrid.Node.Data
Synopsis
IceGrid.Node.Data=path
Description
Defines the path of the IceGrid node data directory. The node creates distrib
, servers
, and tmp
subdirectories in this directory if they do not already exist. The distrib
directory contains distribution files downloaded by the node from an IcePatch2 server. The servers
directory contains configuration data for each deployed server. The tmp
directory holds temporary files.
IceGrid.Node.DisableOnFailure
Synopsis
IceGrid.Node.DisableOnFailure=num
Description
The node considers a server to have terminated improperly if it has a non-zero exit code or if it exits due to one of the signals SIGABRT
, SIGBUS
, SIGILL
, SIGFPE
, or SIGSEGV
. The node marks such a server as disabled if num
is a non-zero value; a disabled server cannot be activated on demand. For values of num
greater than zero, the server is disabled for num
seconds. If num
is a negative value, the server is disabled indefinitely, or until it is explicitly enabled or started via an administrative action. The default value is zero, meaning the node does not disable servers in this situation.
IceGrid.Node.Name
Synopsis
IceGrid.Node.Name=name
Description
Defines the name
of the IceGrid node. All nodes using the same registry must have unique names; a node refuses to start if there is a node with the same name running already. This property must be defined for each node.
IceGrid.Node.Output
Synopsis
IceGrid.Node.Output=path
Description
Defines the path of the IceGrid node output directory. If set, the node redirects the stdout
and stderr
output of the started servers to files named server.out
and server.err
in this directory. Otherwise, the started servers share the stdout
and stderr
of the node's process.
IceGrid.Node.PrintServersReady
Synopsis
IceGrid.Node.PrintServersReady=token
Description
The IceGrid node prints "token
ready" on standard output after all the servers managed by the node are ready. This is useful for scripts that wish to wait until all servers have been started and are ready for use.
IceGrid.Node.ProcessorSocketCount
Synopsis
IceGrid.Node.ProcessorSocketCount=num
Description
This property sets the number of processor sockets. This value is reported by the icegridadmin
node processors
command. On Windows Vista (or later), Windows Server 2008 (or later), and Linux systems, the number of processors is set automatically by the Ice run time. On other systems, the run time cannot obtain the socket count from the operating system; you can use this property to set the number of processor sockets manually on such systems.
IceGrid.Node.PropertiesOverride
Synopsis
IceGrid.Node.PropertiesOverride=overrides
Description
Defines a list of properties that override the properties defined in server deployment descriptors. For example, in some cases it is desirable to set the property Ice.Default.Host
for servers, but not in server deployment descriptors. The property definitions must be separated by white space.
IceGrid.Node.RedirectErrToOut
Synopsis
IceGrid.Node.RedirectErrToOut=num
Description
If num
is set to a value larger than zero, the stderr
of each started server is redirected to the server's stdout
.
IceGrid.Node.Trace.Activator
Synopsis
IceGrid.Node.Trace.Activator=num
Description
The activator trace level:
0 | No activator trace (default). |
1 | Trace process activation, termination. |
2 | Like 1, but more verbose, including process signaling and more diagnostic messages on process activation. |
3 | Like 2, but more verbose, including more diagnostic messages on process activation (e.g., path, working directory, and arguments of the activated process). |
IceGrid.Node.Trace.Adapter
Synopsis
IceGrid.Node.Trace.Adapter=num
Description
The object adapter trace level:
0 | No object adapter trace (default). |
1 | Trace object adapter addition, removal. |
2 | Like 1, but more verbose, including object adapter activation and deactivation and more diagnostic messages. |
3 | Like 2, but more verbose, including object adapter transitional state change (for example, "waiting for activation"). |
IceGrid.Node.Trace.Patch
Synopsis
IceGrid.Node.Trace.Patch=num
Description
The patch trace level:
0 | No patching trace (default). |
1 | Show summary of patch progress. |
2 | Like 1, but more verbose, including download statistics. |
3 | Like 2, but more verbose, including checksum information. |
IceGrid.Node.Trace.Replica
Synopsis
IceGrid.Node.Trace.Replica=num
Description
The replica trace level:
0 | No replica trace (default). |
1 | Trace session lifecycle between nodes and replicas. |
2 | Like 1, but more verbose, including session establishment attempts and failures. |
3 | Like 2, but more verbose, including keep alive messages sent to the replica. |
IceGrid.Node.Trace.Server
Synopsis
IceGrid.Node.Trace.Server=num
Description
The server trace level:
0 | No server trace (default). |
1 | Trace server addition, removal. |
2 | Like 1, but more verbose, including server activation and deactivation and more diagnostic messages. |
3 | Like 2, but more verbose, including server transitional state change (activating and deactivating). |
IceGrid.Node.UserAccountMapper
Synopsis
IceGrid.Node.UserAccountMapper=proxy
Description
Specifies the proxy of an object that implements the IceGrid::UserAccountMapper
interface for customizing the user accounts under which servers are activated. The IceGrid node invokes this proxy to map session identifiers (the user ID for sessions created with a user ID and password, or the distinguished name for sessions created from a secure connection) to user accounts.
As a proxy property, you can configure additional aspects of the proxy using properties.
IceGrid.Node.UserAccounts
Synopsis
IceGrid.Node.UserAccounts=file
Description
Specifies the file name of an IceGrid node user account map file. Each line of the file must contain an identifier and a user account, separated by white space. The identifier will be matched against the client session identifier (the user ID for sessions created with a user ID and password, or the distinguished name for sessions created from a secure connection). This user account map file is used by the node to map session identifiers to user accounts. This property is ignored if #IceGrid.Node.UserAccountMapper
is defined.
IceGrid.Node.WaitTime
Synopsis
IceGrid.Node.WaitTime=num
Description
Defines the interval in seconds that IceGrid waits for server activation and deactivation.
If a server is automatically activated and does not register its object adapter endpoints within this time interval, the node assumes there is a problem with the server and returns an empty set of endpoints to the client.
If a server is being gracefully deactivated and IceGrid does not detect the server deactivation during this time interval, IceGrid kills the server.
The default value is 60 seconds.
IceGrid.Registry.AdminCryptPasswords
Synopsis
IceGrid.Registry.AdminCryptPasswords=file
Description
Specifies the file name of an IceGrid registry access control list for administrative clients. Each line of the file must contain a user name and a password, separated by white space. The password must be a 13-character crypt-encoded string. If this property is not defined, the default value is admin-passwords
. This property is ignored if #IceGrid.Registry.AdminPermissionsVerifier
is defined.
IceGrid.Registry.AdminPermissionsVerifier
Synopsis
IceGrid.Registry.AdminPermissionsVerifier=proxy
Description
Specifies the proxy of an object that implements the Glacier2::PermissionsVerifier
interface for controlling access to IceGrid administrative sessions. The IceGrid registry invokes this proxy to validate each new administrative session created by a client with the IceGrid::Registry
interface.
As a proxy property, you can configure additional aspects of the proxy using properties.
IceGrid.Registry.AdminSessionFilters
Synopsis
IceGrid.Registry.AdminSessionFilters=num
Description
This property controls whether IceGrid establishes filters for sessions created with the IceGrid session manager. If num
is set to a value larger than zero, IceGrid establishes these filters, so Glacier2 limits access to the IceGrid::AdminSession
object and the IceGrid::Admin
object that is returned by the getAdmin
operation. If num
is set to zero, IceGrid does not establish filters, so access to these objects is controlled solely by Glacier2's configuration.
The default value is 1.
IceGrid.Registry.AdminSessionManager.AdapterProperty
Synopsis
IceGrid.Registry.AdminSessionManager.AdapterProperty=value
Description
The IceGrid registry uses the adapter name IceGrid.Registry.AdminSessionManager
for the object adapter that processes incoming requests from IceGrid administrative sessions. Therefore, adapter properties can be used to configure this adapter. (Note any setting of IceGrid.Registry.AdminSessionManager.AdapterId
is ignored because the registry always provides a direct adapter.)
For security reasons, defining endpoints for this object adapter is optional. If you do define endpoints, they should only be accessible to Glacier2 routers used to create IceGrid administrative sessions.
IceGrid.Registry.AdminSSLPermissionsVerifier
Synopsis
IceGrid.Registry.AdminSSLPermissionsVerifier=proxy
Description
Specifies the proxy of an object that implements the Glacier2::SSLPermissionsVerifier
interface for controlling access to IceGrid administrative sessions. The IceGrid registry invokes this proxy to validate each new administrative session created by a client from a secure connection with the IceGrid::Registry
interface.
As a proxy property, you can configure additional aspects of the proxy using the properties.
IceGrid.Registry.Client.AdapterProperty
Synopsis
IceGrid.Registry.Client.AdapterProperty=value
Description
IceGrid uses the adapter name IceGrid.Registry.Client
for the object adapter that processes incoming requests from clients. Therefore, adapter properties can be used to configure this adapter. (Note any setting of IceGrid.Registry.Client.AdapterId
is ignored because the registry always provides a direct adapter.)
Note that IceGrid.Registry.Client.Endpoints
controls the client endpoint for the registry. The port numbers 4061 (for TCP) and 4062 (for SSL) are reserved for the registry by the Internet Assigned Numbers Authority (IANA).
IceGrid.Registry.CryptPasswords
Synopsis
IceGrid.Registry.CryptPasswords=file
Description
Specifies the file name of an IceGrid registry access control list. Each line of the file must contain a user name and a password, separated by white space. The password must be a 13-character crypt-encoded string. If this property is not defined, the default value is passwords
. This property is ignored if #IceGrid.Registry.PermissionsVerifier
is defined.
IceGrid.Registry.Data
Synopsis
IceGrid.Registry.Data=path
Description
Defines the path of the IceGrid registry data directory. The directory specified in path
must already exist. This property must be defined only when the registry uses Freeze or SQLite for its database storage.
IceGrid.Registry.DefaultTemplates
Synopsis
IceGrid.Registry.DefaultTemplates=path
Description
Defines the path name of an XML file containing default template descriptors. A sample file named config/templates.xml
that contains convenient server templates for Ice services is provided in the Ice distribution.
IceGrid.Registry.DynamicRegistration
Synopsis
IceGrid.Registry.DynamicRegistration=num
Description
If num
is set to a value larger than zero, the locator registry does not require Ice servers to preregister object adapters and replica groups, but rather creates them automatically if they do not exist. If this property is not defined, or num
is set to zero, an attempt to register an unknown object adapter or replica group causes adapter activation to fail with Ice.NotRegisteredException
. An object adapter registers itself when the adapter.AdapterId
property is defined. The adapter.ReplicaGroupId
property identifies the replica group.
IceGrid.Registry.Internal.AdapterProperty
Synopsis
IceGrid.Registry.Internal.AdapterProperty=value
Description
The IceGrid registry uses the adapter name IceGrid.Registry.Internal
for the object adapter that processes incoming requests from nodes and slave replicas. Therefore, adapter properties can be used to configure this adapter. (Note any setting of IceGrid.Registry.Internal.AdapterId
is ignored because the registry always provides a direct adapter.)
IceGrid.Registry.NodeSessionTimeout
Synopsis
IceGrid.Registry.NodeSessionTimeout=num
Description
Each IceGrid node establishes a session with the registry that must be refreshed periodically. If a node does not refresh its session within num
seconds, the node's session is destroyed and the servers deployed on that node become unavailable to new clients. If not specified, the default value is 30 seconds.
IceGrid.Registry.PermissionsVerifier
Synopsis
IceGrid.Registry.PermissionsVerifier=proxy
Description
Specifies the proxy of an object that implements the Glacier2::PermissionsVerifier
interface for controlling access to IceGrid sessions. The IceGrid registry invokes this proxy to validate each new client session created by a client with the IceGrid::Registry
interface.
As a proxy property, you can configure additional aspects of the proxy using properties.
IceGrid.Registry.ReplicaName
Synopsis
IceGrid.Registry.ReplicaName=name
Description
Specifies the name of a registry replica. If not defined, the default value is Master
, which is the name reserved for the master replica. Each registry replica must have a unique name.
IceGrid.Registry.ReplicaSessionTimeout
Synopsis
IceGrid.Registry.ReplicaSessionTimeout=num
Description
Each IceGrid registry replica establishes a session with the master registry that must be refreshed periodically. If a replica does not refresh its session within num
seconds, the replica's session is destroyed and the replica no longer receives replication information from the master registry. If not specified, the default value is 30 seconds.
IceGrid.Registry.Server.AdapterProperty
Synopsis
IceGrid.Registry.Server.AdapterProperty=value
Description
The IceGrid registry uses the adapter name IceGrid.Registry.Server
for the object adapter that processes incoming requests from servers. Therefore, adapter properties can be used to configure this adapter. (Note any setting of IceGrid.Registry.Server.AdapterId
is ignored because the registry always provides a direct adapter.)
IceGrid.Registry.SessionFilters
Synopsis
IceGrid.Registry.SessionFilters=num
Description
This property controls whether IceGrid establishes filters for sessions created with the IceGrid session manager. If num
is set to a value larger than zero, IceGrid establishes these filters, so Glacier2 limits access to the IceGrid::Query
and IceGrid::Session
objects, and to objects and adapters allocated by the session. If num
is set to zero, IceGrid does not establish filters, so access to objects is controlled solely by Glacier2's configuration.
The default value is 0.
IceGrid.Registry.SessionManager.AdapterProperty
Synopsis
IceGrid.Registry.SessionManager.AdapterProperty=value
Description
The IceGrid registry uses the adapter name IceGrid.Registry.SessionManager
for the object adapter that processes incoming requests from client sessions. Therefore, adapter properties can be used to configure this adapter. (Note any setting of IceGrid.Registry.SessionManager.AdapterId
is ignored because the registry always provides a direct adapter.)
For security reasons, defining endpoints for this object adapter is optional. If you do define endpoints, they should only be accessible to Glacier2 routers used to create IceGrid client sessions.
IceGrid.Registry.SessionTimeout
Synopsis
IceGrid.Registry.SessionTimeout=num
Description
IceGrid clients or administrative clients might establish a session with the registry. This session must be refreshed periodically. If the client does not refresh its session within num
seconds, the session is destroyed. If not specified, the default value is 30 seconds.
IceGrid.Registry.SSLPermissionsVerifier
Synopsis
IceGrid.Registry.SSLPermissionsVerifier=proxy
Description
Specifies the proxy of an object that implements the Glacier2::SSLPermissionsVerifier
interface for controlling access to IceGrid sessions. The IceGrid registry invokes this proxy to validate each new client session created by a client from a secure connection with the IceGrid::Registry
interface.
As a proxy property, you can configure additional aspects of the proxy using properties.
IceGrid.Registry.Trace.Adapter
Synopsis
IceGrid.Registry.Trace.Adapter=num
Description
The object adapter trace level:
| No object adapter trace (default). |
| Trace object adapter registration, removal, and replication. |
IceGrid.Registry.Trace.Application
Synopsis
IceGrid.Registry.Trace.Application=num
Description
The application trace level:
0 | No application trace (default). |
1 | Trace application addition, update, and removal. |
IceGrid.Registry.Trace.Locator
Synopsis
IceGrid.Registry.Trace.Locator=num
Description
The locator and locator registry trace level:
0 | No locator trace (default). |
1 | Trace failures to locate an adapter or object, and failures to register adapter endpoints. |
2 | Like 1, but more verbose, including registration of adapter endpoints. |
IceGrid.Registry.Trace.Node
Synopsis
IceGrid.Registry.Trace.Node=num
Description
The node trace level:
0 | No node trace (default). |
1 | Trace node registration, removal. |
2 | Like 1, but more verbose, including load statistics. |
IceGrid.Registry.Trace.Object
Synopsis
IceGrid.Registry.Trace.Object=num
Description
The object trace level:
0 | No object trace (default). |
1 | Trace object registration, removal. |
IceGrid.Registry.Trace.Patch
Synopsis
IceGrid.Registry.Trace.Patch=num
Description
The patch trace level:
0 | No patching trace (default). |
1 | Show summary of patch progress. |
IceGrid.Registry.Trace.Replica
Synopsis
IceGrid.Registry.Trace.Replica=num
Description
The server trace level:
0 | No server trace (default). |
1 | Trace session lifecycle between master replica and slaves. |
IceGrid.Registry.Trace.Server
Synopsis
IceGrid.Registry.Trace.Server=num
Description
The server trace level:
0 | No server trace (default). |
1 | Trace server registration, removal. |
IceGrid.Registry.Trace.Session
Synopsis
IceGrid.Registry.Trace.Session=num
Description
The session trace level:
0 | No client or admin session trace (default). |
1 | Trace client or admin session registration, removal. |
2 | Like 1, but more verbose, includes keep alive messages. |
IceGrid.Registry.UserAccounts
Synopsis
IceGrid.Registry.UserAccounts=file
Description
Specifies the file name of an IceGrid registry user account map file. Each line of the file must contain an identifier and a user account, separated by white space. The identifier will be matched against the client session identifier (the user ID for sessions created with a user ID and password, or the distinguished name for sessions created from a secure connection). This user account map file is used by IceGrid nodes to map session identifiers to user accounts if the nodes' #IceGrid.Node.UserAccountMapper
property is set to the proxy IceGrid/RegistryUserAccountMapper
.
IceGrid.SQL.DatabaseType
Synopsis
IceGrid.SQL.DatabaseType=type
Description
This property determines the type of the database for QSqlDatabase::addDatabase
. Permissible values of type
are QSQLITE
, QMYSQL
, QPSQL
, and QODBC
.
IceGrid.SQL.DatabaseName
Synopsis
IceGrid.SQL.Database=name
Description
This property determines the name of the database for QSqlDatabase::setDatabaseName
. For SQLite, name
is the file name for the database. For MySQL and PostgreSQL, name
is the database name. For SQL Server, name
is the DSN name.
For MySQL, the specified database must already exist.
IceGrid.SQL.HostName
Synopsis
IceGrid.SQL.HostName=name
Description
This property determines the host name for QSqlDatabase::setHostName
. For PostgreSQL and MySQL, name
is the database host name. For SQL Server, name
is the host name and server name separated by a blackslash, such as localhost\SQLExpress
. For SQLite, this property has no effect and need not be set.
IceGrid.SQL.Port
Synopsis
IceGrid.SQL.Port=num
Description
This property determines the port number for QSqlDatabase::setPort
.
IceGrid.SQL.UserName
Synopsis
IceGrid.SQL.UserName=name
Description
This property determines the user name for QSqlDatabase::setUserName
. For SQLite, this property has no effect and need not be set.
IceGrid.SQL.Password
Synopsis
IceGrid.SQL.Password=password
Description
This property determines the password for QSqlDatabase::setPassword
. For SQLite, this property has no effect and need not be set.