Preliminary documentation for Ice 3.7.1 Beta. Do not use in production applications. Refer to the space directory for other releases.

The AMI mapping using the AsyncResult API is deprecated and provided only for backward compatibility. New applications should use the Task API.

On this page:

Basic Asynchronous API in C#

Consider the following simple Slice definition:

Slice
module Demo
{ 
    interface Employees
    {
        string getName(int number);
    }
}

Asynchronous Proxy Methods in C#

Besides the synchronous proxy methods, slice2cs generates the following asynchronous proxy methods:

C#
public interface EmployeesPrx : Ice.ObjectPrx
{
    Ice.AsyncResult<Demo.Callback_Employees_getName>
    begin_getName(int number);

    Ice.AsyncResult<Demo.Callback_Employees_getName>
    begin_getName(int number,
                  _System.Collections.Generic.Dictionary<string, string> ctx__);

    string end_getName(Ice.AsyncResult r__);
}

Two additional overloads of begin_getName are generated for use with generic completion callbacks.

As you can see, the single getName operation results in begin_getName and end_getName methods. (The begin_ method is overloaded so you can pass a per-invocation context.)

  • The begin_getName method sends (or queues) an invocation of getName. This method does not block the calling thread.
  • The end_getName method collects the result of the asynchronous invocation. If, at the time the calling thread calls end_getName, the result is not yet available, the calling thread blocks until the invocation completes. Otherwise, if the invocation completed some time before the call to end_getName, the method returns immediately with the result.

A client could call these methods as follows:

C#
EmployeesPrx e = ...;
Ice.AsyncResult r = e.begin_getName(99);

// Continue to do other things here...

string name = e.end_getName(r);

Because begin_getName does not block, the calling thread can do other things while the operation is in progress.

Note that begin_getName returns a value of type Ice.AsyncResult. (The class derives from System.IAsyncResult.) This value contains the state that the Ice run time requires to keep track of the asynchronous invocation. You must pass the AsyncResult that is returned by the begin_ method to the corresponding end_ method.

The begin_ method has one parameter for each in-parameter of the corresponding Slice operation. Similarly, the end_ method has one out-parameter for each out-parameter of the corresponding Slice operation (plus the AsyncResult parameter). For example, consider the following operation:

Slice
double op(int inp1, string inp2, out bool outp1, out long outp2);

The begin_op and end_op methods have the following signature:

C#
Ice.AsyncResult<Demo.Callback_Employees_op> begin_op(int inp1, string inp2);

double end_op(out bool outp1, out long outp2, Ice.AsyncResult r__);

Asynchronous Exception Semantics in C#

If an invocation raises an exception, the exception is thrown by the end_ method, even if the actual error condition for the exception was encountered during the begin_ method ("on the way out"). The advantage of this behavior is that all exception handling is located with the code that calls the end_ method (instead of being present twice, once where the begin_ method is called, and again where the end_ method is called).

There is one exception to the above rule: if you destroy the communicator and then make an asynchronous invocation, the begin_ method throws CommunicatorDestroyedException. This is necessary because, once the run time is finalized, it can no longer throw an exception from the end_ method.

The only other exception that is thrown by the begin_ and end_ methods is System.ArgumentException. This exception indicates that you have used the API incorrectly. For example, the begin_ method throws this exception if you call an operation that has a return value or out-parameters on a oneway proxy. Similarly, the end_ method throws this exception if you use a different proxy to call the end_ method than the proxy you used to call the begin_ method, or if the AsyncResult you pass to the end_ method was obtained by calling the begin_ method for a different operation.

 

AsyncResult Interface in C#

The AsyncResult that is returned by the begin_ method encapsulates the state of the asynchronous invocation:

C#
public interface AsyncResult : System.IAsyncResult
{
    void cancel();
 
    Ice.Communicator getCommunicator();
    Ice.Connection getConnection();
    ObjectPrx getProxy();
    string getOperation();
    object AsyncState { get; }

    bool IsCompleted { get; }
    void waitForCompleted();

    bool isSent();
    void waitForSent();

    void throwLocalException();

    bool sentSynchronously();

    AsyncResult whenSent(Ice.AsyncCallback cb);
    AsyncResult whenSent(Ice.SentCallback cb);
    AsyncResult whenCompleted(Ice.ExceptionCallback ex);
}

public interface AsyncResult<T> : AsyncResult
{
    AsyncResult<T> whenCompleted(T cb, Ice.ExceptionCallback excb);

    new AsyncResult<T> whenCompleted(Ice.ExceptionCallback excb);
    new AsyncResult<T> whenSent(Ice.SentCallback cb);
}

The methods and properties have the following semantics:

  • void cancel()
    This method prevents a queued invocation from being sent or, if the invocation has already been sent, ignores a reply if the server sends one. cancel is a local operation and has no effect on the server. A canceled invocation is considered to be completed, meaning IsCompleted returns true, and the result of the invocation is an Ice.InvocationCanceledException
  • Communicator getCommunicator()
    This method returns the communicator that sent the invocation.
  • Connection getConnection()
    This method returns the connection that was used for the invocation. Note that, for typical asynchronous proxy invocations, this method returns a nil value because the possibility of automatic retries means the connection that is currently in use could change unexpectedly. The getConnection method only returns a non-nil value when the AsyncResult object is obtained by calling begin_flushBatchRequests on a Connection object.
  • ObjectPrx getProxy()
    This method returns the proxy that was used to call the begin_ method, or nil if the AsyncResult object was not obtained via an asynchronous proxy invocation.
  • string getOperation()
    This method returns the name of the operation.
  • object AsyncState { get; }  
    This property stores an object that you can use to pass shared state from the begin_ to the end_ method.
  • bool IsCompleted { get; }  
    This property is true if, at the time it is called, the result of an invocation is available, indicating that a call to the end_ method will not block the caller. Otherwise, if the result is not yet available, the method returns false.
  • void waitForCompleted()
    This method blocks the caller until the result of an invocation becomes available.
  • bool isSent()
    When you call the begin_ method, the Ice run time attempts to write the corresponding request to the client-side transport. If the transport cannot accept the request, the Ice run time queues the request for later transmission. isSent returns true if, at the time it is called, the request has been written to the local transport (whether it was initially queued or not). Otherwise, if the request is still queued or an exception occurred before the request could be sent, isSent returns false.
  • void waitForSent()
    This method blocks the calling thread until a request has been written to the client-side transport, or an exception occurs. After waitForSent returns, isSent returns true if the request was successfully written to the client-side transport, or false if an exception occurred. In the case of a failure, you can call the corresponding end_ method or throwLocalException to obtain the exception.
  • void throwLocalException()
    This method throws the local exception that caused the invocation to fail. If no exception has occurred yet, throwLocalException does nothing.
  • bool sentSynchronously()
    This method returns true if a request was written to the client-side transport without first being queued. If the request was initially queued, sentSynchronously returns false (independent of whether the request is still in the queue or has since been written to the client-side transport).
  • AsyncResult whenSent(Ice.SentCallback cb)
    AsyncResult<T> whenSent(Ice.SentCallback cb)
    AsyncResult whenCompleted(Ice.ExceptionCallback ex)
    AsyncResult<T> whenCompleted(T cb,Ice.ExceptionCallback excb)
    AsyncResult<T> whenCompleted(Ice.ExceptionCallback excb)
    These methods allow you to specify callback methods that are called by the Ice run time. The whenSent methods set a callback that triggers when an asynchronous invocation is written to the client-side transport. The whenCompleted methods set a callback that triggers when an asynchronous invocation completes (also see Generic Completion Callbacks in C#).

 

Polling for Completion in C#

The AsyncResult methods allow you to poll for call completion. Polling is useful in a variety of cases. As an example, consider the following simple interface to transfer files from client to server:

Slice
interface FileTransfer
{
    void send(int offset, ByteSeq bytes);
};

The client repeatedly calls send to send a chunk of the file, indicating at which offset in the file the chunk belongs. A naïve way to transmit a file would be along the following lines:

C#
FileHandle file = open(...);
FileTransferPrx ft = ...;
const int chunkSize = ...;
int offset = 0;
while (!file.eof()) {
    byte[] bs;
    bs = file.read(chunkSize); // Read a chunk
    ft.send(offset, bs);       // Send the chunk
    offset += bs.Length;
}

This works, but not very well: because the client makes synchronous calls, it writes each chunk on the wire and then waits for the server to receive the data, process it, and return a reply before writing the next chunk. This means that both client and server spend much of their time doing nothing — the client does nothing while the server processes the data, and the server does nothing while it waits for the client to send the next chunk.

Using asynchronous calls, we can improve on this considerably:

C#
FileHandle file = open(...);
FileTransferPrx ft = ...;
const int chunkSize = ...;
int offset = 0;

LinkedList<Ice.AsyncResult> results = new LinkedList<Ice.AsyncResult>();
const int numRequests = 5;

while(!file.eof())
{
    byte[] bs;
    bs = file.read(chunkSize);

    // Send up to numRequests + 1 chunks asynchronously.
    Ice.AsyncResult r = ft.begin_send(offset, bs);
    offset += bs.Length;

    // Wait until this request has been passed to the transport.
    r.waitForSent();
    results.AddLast(r);

    // Once there are more than numRequests, wait for the least
    // recent one to complete.
    while(results.Count > numRequests)
    {
        Ice.AsyncResult r = results.First;
        results.RemoveFirst();
        r.waitForCompleted();
    }
}

// Wait for any remaining requests to complete.
while(results.Count > 0)
{
    Ice.AsyncResult r = results.First;
    results.RemoveFirst();
    r.waitForCompleted();
}

With this code, the client sends up to numRequests + 1 chunks before it waits for the least recent one of these requests to complete. In other words, the client sends the next request without waiting for the preceding request to complete, up to the limit set by numRequests. In effect, this allows the client to "keep the pipe to the server full of data": the client keeps sending data, so both client and server continuously do work.

Obviously, the correct chunk size and value of numRequests depend on the bandwidth of the network as well as the amount of time taken by the server to process each request. However, with a little testing, you can quickly zoom in on the point where making the requests larger or queuing more requests no longer improves performance. With this technique, you can realize the full bandwidth of the link to within a percent or two of the theoretical bandwidth limit of a native socket connection.

 

Generic Completion Callbacks in C#

The begin_ method is overloaded to allow you to provide completion callbacks. Here are the corresponding methods for the getName operation:

C#
Ice.AsyncResult begin_getName(
        int number,
        Ice.AsyncCallback cb__,
        object cookie__);

Ice.AsyncResult begin_getName(
        int number,
        _System.Collections.Generic.Dictionary<string, string> ctx__,
        Ice.AsyncCallback cb__,
        object cookie__);

The second version of begin_getName lets you override the default context. (We discuss the purpose of the cookie parameter in the next section.) Following the in-parameters, the begin_ method accepts a parameter of type Ice.AsyncCallback, which is a delegate for a callback method. The Ice run time invokes the callback method when an asynchronous operation completes. Your callback method must have void return type and accept a single parameter of type AsyncResult, for example:

C#
private class MyCallback
{
    public void finished(Ice.AsyncResult r)
    {
        EmployeesPrx e = (EmployeesPrx)r.getProxy();
        try
        {
            string name = e.end_getName(r);
            System.Console.WriteLine("Name is: " + name);
        }
        catch(Ice.Exception ex)
        {
            System.Console.Err.WriteLine("Exception is: " + ex);
        }
    }
}

The implementation of your callback method must call the end_ method. The proxy for the call is available via the getProxy method on the AsyncResult that is passed by the Ice run time. The return type of getProxy is Ice.ObjectPrx, so you must down-cast the proxy to its correct type.

Your callback method should catch and handle any exceptions that may be thrown by the end_ method. If you allow an exception to escape from the callback method, the Ice run time produces a log entry by default and ignores the exception. (You can disable the log message by setting the property Ice.Warn.AMICallback to zero.)

To inform the Ice run time that you want to receive a callback for the completion of the asynchronous call, you pass a delegate for your callback method to the begin_ method:

C#
EmployeesPrx e = ...;

MyCallback cb = new MyCallback();
Ice.AsyncCallback del = new Ice.AsyncCallback(cb.finished);

e.begin_getName(99, del, null); 

The trailing null argument specifies a cookie, which we will discuss shortly.

You can avoid explicit instantiation of the delegate and, more tersely, write:

C#
EmployeesPrx e = ...;

MyCallback cb = new MyCallback();
e.begin_getName(99, cb.finished, null); 

In fact, there's often no need to define a callback class at all. An anonymous method is one alternative:

C#
EmployeesPrx e = ...;

e.begin_getName(99,
    delegate(Ice.AsyncResult r)
    {
        EmployeesPrx e = (EmployeesPrx)r.getProxy();
        try
        {
            string name = e.end_getName(r);
            System.Console.WriteLine("Name is: " + name);
        }
        catch(Ice.Exception ex)
        {
            System.Console.Err.WriteLine("Exception is: " + ex);
        }
    }, null);

A lambda is another alternative:

C#
EmployeesPrx e = ...;

e.begin_getName(99,
    r => {
        EmployeesPrx e = (EmployeesPrx)r.getProxy();
        try
        {
            string name = e.end_getName(r);
            System.Console.WriteLine("Name is: " + name);
        }
        catch(Ice.Exception ex)
        {
            System.Console.Err.WriteLine("Exception is: " + ex);
        }
    }, null);

 

Using Cookies for Generic Completion Callbacks in C#

It is common for the end_ method to require access to some state that is established by the code that calls the begin_ method. As an example, consider an application that asynchronously starts a number of operations and, as each operation completes, needs to update different user interface elements with the results. In this case, the begin_ method knows which user interface element should receive the update, and the end_ method needs access to that element.

The API allows you to pass such state by providing a cookie. A cookie is any class instance; the class can contain whatever data you want to pass, as well as any methods you may want to add to manipulate that data.

Here is an example implementation that stores a Widget. (We assume that this class provides whatever methods are needed by the end_ method to update the display.) When you call the begin_ method, you pass the appropriate cookie instance to inform the end_ method how to update the display:

C#
// Invoke the getName operation with different widget cookies.
MyCallback cb = ...;
e.begin_getName(99, cb.finished, widget1);
e.begin_getName(24, cb.finished, widget2);

The end_ method can retrieve the cookie from the AsyncResult by reading the AsyncState property. For this example, we assume that widgets have a writeString method that updates the relevant UI element:

C#
public void finished(Ice.AsyncResult r)
{
    EmployeesPrx e = (EmployeesPrx)r.getProxy();
    Widget widget = (Widget)r.AsyncState;
    try
    {
        string name = e.end_getName(r);
        widget.writeString(name);
    }
    catch(Ice.Exception ex)
    {
        handleException(ex);
    }
}

The cookie provides a simple and effective way for you to pass state between the point where an operation is invoked and the point where its results are processed. Moreover, if you have a number of operations that share common state, you can pass the same cookie instance to multiple invocations.

 

Type-Safe Completion Callbacks in C#

The generic callback API is not entirely type-safe:

  • You must down-cast the return value of getProxy to the correct proxy type before you can call the end_ method.
  • You must call the correct end_ method to match the operation called by the begin_ method.
  • You must remember to catch exceptions when you call the end_ method; if you forget to do this, you will not know that the operation failed.

slice2cs generates an additional type-safe API that takes care of these chores for you. To use type-safe callbacks, you supply delegates for two callback methods:

  • a success callback that is called if the operation succeeds
  • a failure callback that is called if the operation raises an exception

Here is a callback class for an invocation of the getName operation:

C#
public class MyCallback
{
    public void getNameCB(string name)
    {
        System.Console.WriteLine("Name is: " + name);
    }

    public void failureCB(Ice.Exception ex)
    {
        System.Console.Err.WriteLine("Exception is: " + ex);
    }
}

The callback methods can have any name you prefer and must have void return type. The failure callback always has a single parameter of type Ice.Exception. The success callback parameters depend on the operation signature. If the operation has non-void return type, the first parameter of the success callback is the return value. The return value (if any) is followed by a parameter for each out-parameter of the corresponding Slice operation, in the order of declaration.

At the calling end, you call the begin_ method as follows:

C#
MyCallback cb = new MyCallback();

e.begin_getName(99).whenCompleted(cb.getNameCB, cb.failureCB);

Note the whenCompleted method on the AsyncResult that is returned by the begin_ method. This method establishes the link between the begin_ method and the callbacks that are called by the Ice run time by setting the delegates for the success and failure methods.

It is legal to pass a null delegate for the success or failure methods. For the success callback, this is legal only for operations that have void return type and no out-parameters. This is useful if you do not care when the operation completes but want to know if the call failed. If you pass a null exception delegate, the Ice run time will ignore any exception that is raised by the invocation.

Defining a callback class as we've shown above is only necessary in practice when the callback has additional state to manage. In many cases, there's no need for a callback class and the delegates can be defined inline:

C#
e.begin_getName(99).whenCompleted(
    delegate(string name)
    {
        System.Console.WriteLine("Name is: " + name);
    },
    delegate(Ice.Exception ex)
    {
        System.Console.Err.WriteLine("Exception is: " + ex);
    });

Using lambda functions makes the callbacks even more compact:

C#
e.begin_getName(99).whenCompleted(
    name => {
        System.Console.WriteLine("Name is: " + name);
    },
    ex => {
        System.Console.Err.WriteLine("Exception is: " + ex);
    });

 

Using Cookies for Type-Safe Completion Callbacks in C#

The type-safe API does not support cookies. If you want to pass state from the begin_ method to the end_ method, you must use the generic API or, alternatively, place the state into the callback class containing the callback methods. Here is a simple implementation of a callback class that stores a widget that can be retrieved by the end_ method:

C#
public class MyCallback
{
    public MyCallback(Widget w)
    {
        _w = w;
    }

    private Widget _w;

    public void getNameCB(string name)
    {
        _w.writeString(name);
    }

    public void failureCB(Ice.Exception ex)
    {
        _w.writeError(ex);
    }
}

When you call the begin_ method, you pass the appropriate callback instance to inform the end_ method how to update the display:

C#
EmployeesPrx e = ...;
Widget widget1 = ...;
Widget widget2 = ...;

MyCallback cb1 = new MyCallback(widget1);
MyCallback cb2 = new MyCallback(widget2);

// Invoke the getName operation with different widget callbacks.

e.begin_getName(99).whenCompleted(cb1.getNameCB, cb1.failureCB);
e.begin_getName(24).whenCompleted(cb2.getNameCB, cb2.failureCB);

 

Asynchronous Oneway Invocations in C#

You can invoke operations via oneway proxies asynchronously, provided the operation has void return type, does not have any out-parameters, and does not raise user exceptions. If you call the begin_ method on a oneway proxy for an operation that returns values or raises a user exception, the begin_ method throws a System.ArgumentException.

For the generic API, the callback method looks exactly as for a twoway invocation. However, for oneway invocations, the Ice run time does not call the callback method unless the invocation raised an exception during the begin_ method ("on the way out").

For the type-safe API, you only specify a delegate for the failure method. For example, here is how you could call ice_ping asynchronously:

C#
ObjectPrx p = ...;
MyCallback cb = new MyCallback();
p.begin_ice_ping().whenCompleted(cb.failureCB);

 

Flow Control in C#

Asynchronous method invocations never block the thread that calls the begin_ method: the Ice run time checks to see whether it can write the request to the local transport. If it can, it does so immediately in the caller's thread. (In that case, AsyncResult.sentSynchronously returns true.) Alternatively, if the local transport does not have sufficient buffer space to accept the request, the Ice run time queues the request internally for later transmission in the background. (In that case, AsyncResult.sentSynchronously returns false.)

This creates a potential problem: if a client sends many asynchronous requests at the time the server is too busy to keep up with them, the requests pile up in the client-side run time until, eventually, the client runs out of memory.

The API provides a way for you to implement flow control by counting the number of requests that are queued so, if that number exceeds some threshold, the client stops invoking more operations until some of the queued operations have drained out of the local transport.

For the generic API, you can create an additional callback method:

C#
public class MyCallback
{
    public void finished(Ice.AsyncResult r)
    {
        // ...
    }

    public void sent(Ice.AsyncResult r)
    {
        // ...
    }
}

As with any other callback method, you are free to choose any name you like. For this example, the name of the callback method is sent. You inform the Ice run time that you want to be informed when a call has been passed to the local transport by calling whenSent:

C#
MyCallback cb = new MyCallback();

e.begin_getName(99).whenCompleted(cb.getNameCB, cb.failureCB).whenSent(cb.sent);

If the Ice run time can immediately pass the request to the local transport, it does so and invokes the sent method from the thread that calls the begin_ method. On the other hand, if the run time has to queue the request, it calls the sent method from a different thread once it has written the request to the local transport. In addition, you can find out from the AsyncResult that is returned by the begin_ method whether the request was sent synchronously or was queued, by calling sentSynchronously.

For the generic API, the sent method has the following signature:

C#
void sent(Ice.AsyncResult r);

For the type-safe API, the signature is:

C#
void sent(bool sentSynchronously);

For the generic API, you can find out whether the request was sent synchronously by calling sentSynchronously on the AsyncResult. For the type-safe API, the boolean sentSynchronously parameter provides the same information.

The sent methods allow you to limit the number of queued requests by counting the number of requests that are queued and decrementing the count when the Ice run time passes a request to the local transport.

 

Asynchronous Batch Requests in C#

You can invoke operations via batch oneway proxies asynchronously, provided the operation has void return type, does not have any out-parameters, and does not raise user exceptions. If you call the begin_ method on a oneway proxy for an operation that returns values or raises a user exception, the begin_ method throws a System.ArgumentException.

A batch oneway invocation never calls the generic or type-safe callbacks unless an error occurs before the request is queued. The returned Ice.AsyncResult for a batch oneway invocation is always completed and indicates the successful queuing of the batch invocation. The returned result can also be marked completed if an error occurs before the request is queued.

Applications that send batched requests can either flush a batch explicitly or allow the Ice run time to flush automatically. The proxy method ice_flushBatchRequests performs an immediate flush using the synchronous invocation model and may block the calling thread until the entire message can be sent. Ice also provides asynchronous versions of this method so you can flush batch requests asynchronously.

begin_ice_flushBatchRequests and end_ice_flushBatchRequests are proxy methods that flush any batch requests queued by that proxy.

In addition, similar methods are available on the communicator and the Connection object that is returned by AsyncResult.getConnection. These methods flush batch requests sent via the same communicator and via the same connection, respectively.

 

Concurrency Semantics for AMI in C#

The Ice run time always invokes your callback methods from a separate thread, with one exception: it calls the sent callback from the thread calling the begin_ method if the request could be sent synchronously. In the sent callback, you know which thread is calling the callback by looking at the sentSynchronously member or parameter.

See Also

  • No labels