IceStorm is an IceBox service that you can install using any name you like. For example:
IceBox.Service.DataFeed=IceStormService,...
The service name you choose is also used as the prefix for IceStorm's configuration properties. In the example above, the IceStorm configuration properties would use the DataFeed prefix, as in DataFeed.Discard.Interval=10.
In the property descriptions below, replace service with the service name from your IceStorm configuration.
On this page:
service.Discard.Interval
Synopsis
service.Discard.Interval=num
Description
An IceStorm server detects when a subscriber to which it forwards events becomes non-functional and, at that point, stops delivery attempts to that subscriber for num seconds before trying to forward events to that subscriber again. The default value of this property is 60 seconds.
service.Election.ElectionTimeout
Synopsis
service.Election.ElectionTimeout=num
Description
This property is used by a replicated IceStorm deployment. It specifies the interval in seconds at which a coordinator attempts to form larger groups of replicas. If not defined, the default value is 10.
service.Election.MasterTimeout
Synopsis
service.Election.MasterTimeout=num
Description
This property is used by a replicated IceStorm deployment. It specifies the interval in seconds at which a slave checks the status of the coordinator. If not defined, the default value is 10.
service.Election.ResponseTimeout
Synopsis
service.Election.ResponseTimeout=num
Description
This property is used by a replicated IceStorm deployment. It specifies the interval in seconds that a replica waits for replies to an invitation to form a larger group. Lower priority replicas wait for intervals inversely proportional to the maximum priority:
ResponseTimeout + ResponseTimeout * (max - pri)
If not defined, the default value is 10.
service.Flush.Timeout
Synopsis
service.Flush.Timeout=num
Description
Defines the interval in milliseconds with which events are sent to batch subscribers. The default is 1000ms.
service.InstanceName
Synopsis
service.InstanceName=name
Description
Specifies an alternate identity category for all objects hosted by the IceStorm object adapters. If not specified, the default identity category is IceStorm.
service.LMDB.MapSize
Synopsis
service.LMDB.MapSize=num
Description
Specifies the map size for the IceStorm LMDB database environment. The value is specified in megabytes. If not specified or set to 0, IceStorm uses a system-dependent default: 10 MB on Windows, and 100 MB on other platforms.
service.LMDB.Path
Synopsis
service.LMDB.Path=dir
Description
Specifies the path to the LMDB database environment of this IceStorm service. If not specified, the default value is the service name. This directory must exist when IceStorm starts up unless IceStorm is in transient mode.
service.Node.AdapterProperty
Synopsis
service.Node.AdapterProperty=value
Description
In a replicated deployment, IceStorm uses the adapter name service.Node for the replica node's object adapter. Therefore, adapter properties can be used to configure this adapter.
service.NodeId
Synopsis
service.NodeId=value
Description
Specifies the node ID of an IceStorm replica, where value is a non-negative integer. The node ID is also used as the replica's priority, such that a larger value assigns higher priority to the replica. The replica with the highest priority becomes the coordinator of its group. This property must be defined for each replica.
service.Nodes.id
Synopsis
service.Nodes.id=value
Description
This property is used for a manual deployment of highly available IceStorm, in which each of the replicas must be explicitly configured with the proxies of all other replicas. The value is a proxy for the replica with the given node id. A replica's object identity has the form instance-name/nodeid, such as DemoIceStorm/node2.
service.Publish.AdapterProperty
Synopsis
service.Publish.AdapterProperty=value
Description
IceStorm uses the adapter name service.Publish for the object adapter that processes incoming requests from publishers. Therefore, adapter properties can be used to configure this adapter.
service.ReplicatedPublishEndpoints
Synopsis
service.ReplicatedPublishEndpoints=value
Description
This property is used for a manual deployment of highly available IceStorm. It specifies the set of endpoints returned for the publisher proxy returned from IceStorm::Topic::getPublisher.
If this property is not defined, the publisher proxy returned by a topic instance points directly at that replica and, should the replica become unavailable, publishers will not transparently failover to other replicas.
service.ReplicatedTopicManagerEndpoints
Synopsis
service.ReplicatedTopicManagerEndpoints=value
Description
This property is used for a manual deployment of highly available IceStorm. It specifies the set of endpoints used in proxies that refer to a replicated topic. This set of endpoints should contain the endpoints of each IceStorm replica.
For example, the operation IceStorm::TopicManager::create returns a proxy that contains this set of endpoints.
service.Send.Timeout
Synopsis
service.Send.Timeout=num
Description
IceStorm applies a send timeout when it forwards events to subscribers. The value of this property determines how long IceStorm will wait for forwarding of an event to complete. If an event cannot be forwarded within num milliseconds, the subscriber is considered dead and its subscription is cancelled. The default value is 60 seconds. Setting this property to a negative value disables timeouts.
service.Send.QueueSizeMax
Synopsis
service.Send.QueueSizeMax=num
Description
The value of this property determines how many events can be queued for a subscriber by IceStorm. When the maximum size is reached, the old events will either be dropped or the subscriber will be removed. Setting this property to a negative value specifies an infinite queue size. The default value is -1.
service.Send.QueueSizeMaxPolicy
Synopsis
service.Send.QueueSizePolicy=RemoveSubscriber|DropEvents
Description
The value of this property specifies how IceStorm will behave if the maximum queue size is reached for a subscriber. If set to RemoveSubscriber, IceStorm will remove the subscriber as soon as the limit is reached. If set to DropEvents, older events will be removed to make room for new events. The default value is RemoveSubscriber.
service.TopicManager.AdapterProperty
Synopsis
service.TopicManager.AdapterProperty=value
Description
IceStorm uses the adapter name service.TopicManager for the topic manager's object adapter. Therefore, adapter properties can be used to configure this adapter.
service.Trace.Election
Synopsis
service.Trace.Election=num
Description
Trace activity related to elections:
0 | No election trace (default). |
1 | Trace election activity. |
service.Trace.Replication
Synopsis
service.Trace.Replication=num
Description
Trace activity related to replication:
0 | No replication trace (default). |
1 | Trace replication activity. |
service.Trace.Subscriber
Synopsis
service.Trace.Subscriber=num
Description
The subscriber trace level:
0 | No subscriber trace (default). |
1 | Trace topic diagnostic information on subscription and unsubscription. |
2 | Like 1, but more verbose, including state transitions for a subscriber (such as going offline after a temporary network failure, and going online again after a successful retry, etc.). |
service.Trace.Topic
Synopsis
service.Trace.Topic=num
Description
The topic trace level:
0 | No topic trace (default). |
1 | Trace topic links, subscription, and unsubscription. |
2 | Like 1, but more verbose, including QoS information, and other diagnostic information. |
service.Trace.TopicManager
Synopsis
service.Trace.TopicManager=num
Description
The topic manager trace level:
0 | No topic manager trace (default). |
1 | Trace topic creation. |
service.Transient
Synopsis
service.Transient=num
Description
If num is a value greater than zero, IceStorm runs in a fully transient mode in which no database is required. Replication is not supported in this mode. If not defined, the default value is zero.